facebook rss twitter

Noctua NH-P1 passive CPU cooler hits retail at $100

by Mark Tyson on 7 June 2021, 09:18

Tags: Noctua

Quick Link: HEXUS.net/qaeqow

Add to My Vault: x

Please log in to view Printer Friendly Layout

Last month Noctua insisted that its passive CPU cooler was "coming very soon", and over the weekend it has been spotted up for sale at Newegg in the USA. The listing for the Noctua NH-P1 has it as available and in stock now at $100 plus shipping. A bullet point set of key features as well as a more lengthy description is available on the retail produce page, which is good because Noctua web designers are still in bed and there is no official product page or press release available yet.

An overview of the NH-P1 provided by the retailer explains that this is "Noctua’s first passive CPU cooler and has been custom-designed for fanless operation from the ground up." In order to cool passively and effectively the large device has combined six heatpipes with "thick, widely spaced heatsink fins." We previously learnt that these aluminium fins are not like the typical designs we usually see on active coolers, due to their thickness Noctua needed to invest in extra machinery.

Noctua recommends the NH-P1 for use in "low to moderate heat dissipation," systems, and name checks the following processors as being within that remit "Intel 9900K, 9700K or AMD Ryzen 2700X, 3950X 3700X, 3400G, etc". You will need to be installing in a well vented PC case, an open benchtable-type setup or a PC case with fans in order to achieve the full performance of this cooler. If your PC case doesn't have good natural convection, Noctua suggests you add a low-speed, ultra-quiet 120mm fan such as the NF-A12x25 LS-PWM for semi-passive operation that will be "virtually inaudible".

Considering some further practicalities, the NH-P1 offers 100 per cent RAM compatibility on AMD AM4 and Intel LGA1200/115x, clears the top PCIe slot on most ATX and micro ATX motherboards. Noctua provides a Torx-based SecuFirm2+ mounting system for Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), LGA1200, LGA20xx (LGA2066, LGA2011-0, LGA2011-3) & AMD AM4, AM3(+), AM2(+), FM2(+), FM1 sockets. Buyers will find that Noctua's NT-H2 thermal compound has been pre-applied.

We don't have all the specs I would be interested in checking over yet, perhaps Noctua will be uploading its official product pages and data sheets this week. Some basics like dimensions and weight are missing, for example, and some example processor cooling graphs would be welcome. Buyers get a six-year warranty.



HEXUS Forums :: 12 Comments

Login with Forum Account

Don't have an account? Register today!
You will need to be installing in a well vented PC case, an open benchtable-type setup or a PC case with fans in order to achieve the full performance of this cooler.

Passive CPU cooler works best in case that has lots of fans… :clapping:

I would prefer the warranty to be much longer than 6 years considering there are no moving parts (for comparison the Arctic Liquid Freezer II has a 6 year warranty, and clearly has significantly more potential for failure).
Pricey metal. I wonder what will happen after 6 years with it, definetly will not stop working.
rave_alan
Pricey metal. I wonder what will happen after 6 years with it, definetly will not stop working.
Not sure about that. The air around the cooler might start to move slower after some years…
rave_alan
Pricey metal. I wonder what will happen after 6 years with it, definetly will not stop working.

As I understand it, it's more the heat pipes that are the worry areas.
Stu C;4293771
Passive CPU cooler works best in case that has lots of fans… :clapping:

I would prefer the warranty to be much longer than 6 years considering there are no moving parts (for comparison the Arctic Liquid Freezer II has a 6 year warranty, and clearly has significantly more potential for failure).

I suspect the it is by far most likely that it will become obsolete due to CPU socket changes, long before there is any chance of anything going wrong with it. I'm sure any problem due to manufacturing defects, will surface well inside 6 years.