27 May 2001, 00:00
If you are going to have the fans drawing air away from the heatsink then yes I think they are a worthwhile investment you may even get better results if ...
13 May 2001, 00:00
A lot of companies are claiming to have the units, but I have spoken to Coolerguys and they said they are more than happy to hook UK people up with ...
13 May 2001, 00:00
So which one do I recommend? I would choose (and always will) The CoolerGuys Cool Shim
8 May 2001, 00:00
It is still not fully known whether the upcoming SMP Socket A boards will take tbirds, but if it does, I imagine for many people, two AXIAs would prove an ...
10 March 2001, 00:00
This is the first part in a series of articles documenting the construction of probably one of the fastest, coolest and most outrageous PC's to ever be built.
4 March 2001, 00:00
I have done my extensive testing, 24 hours nearly with each heat sink, with many different room temps, I am not gonna give you all the temp readings etc. as ...
1 March 2001, 00:00
I included them and the pictures in this review to make it slightly easier to understand and get it working on your own KT7A motherboard.
19 February 2001, 00:00
Would I recommend it ? well hell yeah! This product is slightly cheaper than the original because you get less. But even so some might say this is a bad ...
17 February 2001, 00:00
This unit is amazing, it is very powerful, and we will run this in our test rig from now on and see how it works long term.
9 February 2001, 00:00
We have just had a leak from someone at CPUfx, this is their latest Heatsink, it is CNCed from Aluminum, and looks like a serious bit of kit!
16 January 2001, 00:00
This system is easy to install and set-up, the pump is silent and anyone can use it. This system is easy to maintain and use. It is developed To be ...
27 November 2000, 00:00
Well, here I am, writing my first article and I decided to do it on watercooling. Yes, I know it has been done before, but most of the articles I ...
27 November 2000, 00:00
All in all if your overclocking on a budget and need the extra cooling power then the Super ORB is definitely for you + the looks alone would make this ...
17 October 2000, 00:00
I think that this is a must for any serious overclockers, but remember the noise; And this heatsink is lovely! If only they had done more work on it like ...
20 September 2000, 00:00
Well the results speak for themselves at load at 950mhz the Chrome ORB dropped the CPU temperature by 7c compared to the generic Heatsink & Fan, which works out at ...
17 September 2000, 00:00
The motherboard is nice, very nice with the inclusion of 6 PCI slots you can't complain, and the abilty to have different clock speeds for the memory and FSB this ...
7 September 2000, 00:00
I would like say that running the CPU @ 1,002MHz with the optimal settings on, is just amazing.
7 September 2000, 00:00
Ok, well lets begin. About a month ago or so, I was in the market for a CPU upgrade and I ran across a deal on a new Celeron II ...
7 September 2000, 00:00
AMD Duron Overclocking Guide - a budget blaster?
7 September 2000, 00:00
The Coolermaster heat sink is the best performer but it does get hot, but hey that’s what they are supposed to get hot, and then the fan is supposed to ...
27 June 2000, 00:00
Unlike its rival, the NVIDIA TNT2, the 3dfx Voodoo 3 does not have a stripped down alternative chip. The low cost version (2000) didn't have TV out (like the 3000) ...
2 June 2000, 00:00
An Alpha P7125 is the best performance Athlon cooler you can buy. It is expensive at $49.95 and £40. I think that this finish off my main system nicely in ...
2 June 2000, 00:00
We have found a card which is very useful to you the end user. Instead of using dip-switches it has a series of dials.
16 May 2000, 00:00
I got an Athlon Freezer Pro, which is actually the same as the Athlon Freezer, but has some additional chrome fan guards on it.
16 May 2000, 00:00
A quick guide on how to turn a 400MHz chip into a slightly charred 350Mhz chip.
Sign in for the best HEXUS experience
LOG IN