External Appearance – Rear
Around the back of the Zero it’s a fairly standard affair with two 120mm fans pre-fitted. The one thing you do get to notice is the sheer size of the chassis, with a large space at the back, directly above the I/O section.
Apart from the usual breakout plates at the bottom there isn’t much to shout about with the Zero, especially given that some of that unused space could have been put to good use - water-cooled preparation, maybe?
The other issue we had with the Zero was in relation to the PSU area. The mounting system for the PSU is fixed, so you have to slide the PSU in from the inside, but more on that later.
