facebook rss twitter

AMD introduces AM1 platform - user-upgradeable Kabini

by David Ross on 4 March 2014, 12:00

Tags: AMD (NYSE:AMD)

Quick Link: HEXUS.net/qacbhb

Add to My Vault: x

AMD reinvigorated its desktop accelerated processing unit (APU) line-up this January with the launch of Kaveri-based processors. These brought architecture improvements for both the CPU and GPU through the use of the enhanced Steamroller cores and GCN graphics, respectively.

Mainstream desktop APUs make a reasonable case for inclusion in a budget PC build, but starting at a thermal design point (TDP) of 45W, they're not ideally suited for very small, cheap systems that sell well in emerging countries.

AMD has a solution for such markets, however, as low-power Kabini and Temash APUs offer adequate performance for everyday computing. Plying 3.9W-25W TDPs, the problem thus far is one of form factor for do-it-yourself PC builders, as these APUs are only available in Socket FT3 (BGA, really) or embedded form. This means the APUs are integrated into motherboards, reducing choice and curtailing an upgrade path.

Now, though, AMD is making Kabini APUs available in a user-upgradeable, socketed form factor called FS1b, which has been previously used for laptop processors. First shown at the Consumer Electronics Show at the turn of the year, FS1b-based boards are to be made available from the usual roster of partners - ASRock, Asus, Gigabyte, Biostar, ECS and Gigabyte - and presented in mini-ITX and micro-ATX form factors.

The combination of socketed Kabini APU and FS1b is now referred to as the AM1 platform or package. AMD isn't divulging the exact specification of AM1 APUs just yet, but we do know they'll feature up to four Jaguar CPU cores and GCN graphics.

And here's a micro-ATX AM1-supporting motherboard from Gigabyte. There's no separate chipset core logic because the Kabini APU, more accurately referred to as a system-on-chip (SoC), integrates everything into the package, including a single-channel memory controller capable of interfacing with up to 16GB of DDR3-1,600 RAM, dual SATA 6Gbps, two USB 3.0, and a flexible array of video outputs.

Productised as AMD Athlon and Sempron APUs, these low-power chips appear to be a good fit for everyday systems that don't need huge processing power. It is likely that the initial raft of APUs will use either 15W or 25W TDPs. Following on from the nascent success of Intel's Next Unit of Computer (NUC), AMD could strike a chord with PC users who want a small, sleek system that, unlike the rival Intel Bay Trail, is upgradeable on the CPU front. We reckon these APUs could make real sense if presented in a more NUC-like form factor, rather than just on plain-Jane micro/mini-ITX.

AMD says it expects AM1-based Sempron to start from $39 (£30) rising to $60 (£45) for the faster Athlon. There's no word on speeds and feeds at the moment.



HEXUS Forums :: 9 Comments

Login with Forum Account

Don't have an account? Register today!
Although it says that perhaps a different format could be better I'd imagine someone would come along very shortly as integrating am SoC should be easy!


There is something slightly weird with seeing a USB3 port and a parallel port sitting next to each other.
After a quick thought though this would make an excellent nas4free box. If you needed extra capacity a nice PCI-E card would be a nice addition
3dcandy
After a quick thought though this would make an excellent nas4free box. If you needed extra capacity a nice PCI-E card would be a nice addition
I would that thought that having only two SATA ports might be a problem unless you fancy software RAID0/1 only. Anything more than a two disk setup means you've got to budget for an external disk controller, (yes I know you can get those for a little as £10/port these days). At least it's got PCI and PCI-E so you've got a choice.

Maybe make a nice low powered media centre, (or NAS once you've added those extra disk ports).
Exactly…plenty of power and you can boot from USB thus keeping the 2 SATA ports free